- Home
- Online Store
-
Parking & ITS Solutions (531)
- Gate Operators (121)
- Entry Systems (35)
- Turnstiles (20)
- MORE ...
-
Industrial Products (649)
- Industrial Signage (311)
- Barricades (13)
- Standard Guardrail (29)
- MORE ...
-
Work Zone Products (1010)
- Cones (143)
- Barricades and Accessories (100)
- Channelizer Drums (20)
- MORE ...
-
Delineators & Markers (377)
- Delineators (118)
- In-Street Signs and Delineators (71)
- Roadside Delineator Markers (31)
- MORE ...
-
StreetScape Decoratives (314)
- Decorative Poles (12)
- Decorative Bases (6)
- Decorative Luminaires (29)
- MORE ...
-
Parks & Recreation Products (1368)
- Park Benches (53)
- Park Tables (89)
- Waste & Recycling Receptacles (184)
- MORE ...
-
- Solutions
- Divisions
- About
- Contracts & Agreements
- Contact
Request quote | Request catalog | Login or New to TAPCO? Register today! | empty
The business of safety since 1956
1-800-236-0112
- IWS Solutions
- IWS Resources
- IWS Videos
- Shop IWS Products
- IWS Photos
Rectangular Rapid Flash Beacon (RRFB)
TAPCO's pedestrian activated RRFB systems have produced 80% to 90% driver compliance in yielding to pedestrians at high-risk uncontrolled crossings. When activated, the LED arrays flash an FHWA specified, alternating 'wig-wag' pattern. Side-mounted LED arrays flash concurrently to advise pedestrians that the units are flashing. This is the highest yielding rate of all devices not featuring a red display, and up to 4 times greater than standard round beacons. RRFBs cost less than other devices with similar vehicular yield rates.
Features & Advantages
- Driver yielding rates of 80%*
- Wireless, synchronized LEDs
- Solar-powered, eco-friendly
- Easy installation, maintenance free
- Web-based monitoring/alert option
- LED Indicators for pedestrians
- More effective than round beacons
Recommended applications
- School Crossings
- Pedestrian Crossings
- Roundabout Crossings
- High-Speed and multi-lane crossings
80% reduction to yield to pedestrian traffic!*
RRFB-XL System
The Xtra-Large 7" x 3" LED arrays on the RRFB-XL provide greater visibility than standard RRFB, exceeding Federal specifications. The increased visibility is ideal for multi-lane and higher-speed roadways.
pdf
1005-00001-RRFBXL.pdf | file size: 3.3mb
RRFB Standard System
The Standard Size RRFB features 5" x 2" LED arrays, meeting Federal specifications as stated in FHWA Memorandum IA-11.
pdf
tapco_rrfb_standard.pdf | file size: 1.9mb
* "An Analysis of the Efficacy of Rectangular-shaped Rapid-Flash LED Beacons to Increase Yielding to Pedestrians Using
Crosswalks on Multilane Roadways in the City of St. Petersburg, FL", Center for Education and Research in Safety (view report)
See TAPCO's Rectangular Rapid Flash Beacon in action
This video of TAPCO's Rectangular Rapid Flash Beacon demonstrates the RRFB in different situations and time of day.
| Standard Specifications | |
|---|---|
| MUTCD Approval, Optional Use of RRFB | Interim FHWA Approval Memorandum (1A-11) |
| Housing | Powder coated aluminum |
| LED Modules (2 per direction) | 6 amber LED array, - 5" x 2" (Standard RRFB) or 3" x 7" (RRFB-XL), SAE J595 certified |
| Flash Pattern | Meets 2-4-1 FHWA regulations |
| Mounting Hardware (enclosed) | Stainless steel u-bolts for 4" to 4 1/2" O.D. pole |
| Housing | NEMA 4 rated fiberglass cabinet with lockable clasps |
| Solar Panel (25.75" x 25.25" x 1.4375") | 55 watt solar panel set at 40° or 60°. Conforms to IP-67. Includes aluminum mounting bracket for 4" to 4½" O.D. pole. |
| Batteries one per assembly) | 12V, 40AH Sealed Gel battery requires no periodic watering. Sealed construction eliminates corrosive acid fumes and spills. |
| Battery Lifespan | 3-5 years |
| Autonomy | Up to 30 days without sun |
| Control Circuit | IP-67 NEMA rated enclosure, dustproof and waterproof in water up to 3' for 30 minutes |
| Frequency | 900 MHz FHSS |
| Range | Up to 3 miles with optional external antennas. For system separation over 900', a site survey is recommended for optimal performance. |
| Radio | Operates on 900 MHz frequency hopping spread spectrum network. Operating range from 3.6vdc to 15vdc |
| Programmability | Up to 50 systems in one network |
| Push-button Activation | ADA pushbutton, typical (<120 millisecond) [1] |
| RS232 Communications Port | |
| Programming via Windows basic software: Optional wireless cellular or internet programming | |
| Sign Substrate (30" or 36" signs) | .080" Highway grade aluminum |
| Reflective Sheeting | 3M™ DG3 with anti-graffiti overlay |
| Hardware | Zinc-plated steel anti-vandal fasteners for signs and RRFB units |
| Multiple units in one system will flash in synchronized patterns to avoid light noise of system operation. Ideal for multiple units flashing in the same direction, without the need for wiring. | |
DISCLAIMER: These specifications are for the blinker / beacon system only and doesn't include the specifications for the add-on smart activations. Specifications are subject to change without notice. For additional specifications and details, please contact us!
Push Button
- Activated with less than 2 lbs force
- Provides two-tone audible confirmation as well as visual confirmation
- Cannot be jammed or stuck in "on" position
- Wind, hail and vibrations have no effect
- Superior grade pre-treatment and powder coat
- Stainless steel button cap
- Meets ADA, MUTCD and TAC requirements
- Transient protection that meets and exceeds NEMA specifications
PB_BOLL_guide_120817.pdf | file size: 967kb
BlinkLink™ Web-based Traffic Device Monitor & Control Software System
Monitor BlinkerSign® and other ITS device status from any web-enabled computer. Comprehensive management of all device settings, schedules and messages. Real-time information allows you to respond immediately to changing situations.
IWS-blinklink.pdf | file size: 1.9mb
Wireless Bollard
Pedestrians and bicyclists can passively trigger flashing BlinkerSign® LED signs, in-pavement LEDs, beacon warning systems and other ITS devices. Actuators are housed in anodized aluminum cabinets that can be secured to concrete or asphalt.
- Install virtually anywhere, utilizing wireless control if needed
- Designed to interface with ITS devices
- Dependable, precise control with minimal maintenance
- Battery operated: no grid wiring required
- No trenching or concrete cutting required
Motion and Presence Detector
Active infrared and microwave technologies work together to provide precise presence and accurate vehicle and pedestrian motion detection.
- Mountable between 8' and 16'
- Impervious to light, sun rain and snow
- Housing is rated NEMA-4
Other Activation Methods Available
Do you have a unique problem requiring a custom activated BlinkerSign® system? For years TAPCO has been providing custom stand-alone solar solutions. These electrical grid independent systems provide reliable warning when needed most-in harsh environments, dangerous areas and remote locations.
- Climate activation (fog, snow, ice, wind, etc.)
- Water sensor (flood detection)
- In-ground inductive loop
- Overheight detection
- Temperature sensor
IWS-rrfb.pdf | file size: 645kb
tapco_rrfb_standard.pdf | file size: 1.9mb
pdf
1005-00001-RRFBXL.pdf | file size: 3.3mb
RRFBXL_Solar_guide_120813.pdf | file size: 2mb
RRFBXL_110V_sheet_120306.pdf | file size: 433kb
RRFBXL_AC_guide_120723.pdf | file size: 1.71mb
1005-00004-Pedestrian-Solutions.pdf | file size: 4.5mb
Discuss Options With Us
Call us at 1-800-236-0112
Other Activation Methods Available
Do you have a unique problem requiring a custom activated BlinkerSign® system? For years TAPCO has been providing custom stand-alone solar solutions. These electrical grid independent systems provide reliable warning when needed most-in harsh environments, dangerous areas and remote locations.
- Climate activation (fog, snow, ice, wind, etc.)
- Water sensor (flood detection)
- In-ground inductive loop
- Overheight detection
- Temperature sensor
Are you registered?
Registered TAPCO site visitors gain access to personalized content, saved account info for easier ordering & much more!
Learn more
or login
Shop
TAPCO Divisions
Company
Help
5100 W Brown Deer Road, Brown Deer, WI 53223 | Phone: 1-800-236-0112 | Fax: 1-800-444-0331
© 1956 - 2013, Traffic & Parking Control Co., Inc. All rights reserved.
