Highly productive in utility construction, street maintenance, repair of water and gas mains and general contracting jobs. |
 |
| Cobra mk1 Breaker |
|
SPECIFICATIONS:
length: 36 inches
Net weight: 53
lbs.
Engine: 90cc
1 cylinder, 2 stroke
Fuel Capacity: 1.1
US quarts
Fuel Consumption: 1 qt./hour
Fuel Mixture: 1:50
Blows/Minute: 720-1440
Chuck Size:1
¼" or 1 1/8 "
When ordering specify
chuck size.
(340-2) |
|
The
Cobra mk1 is a powerful gas-powered breaker. Its impact energy of 60 joules
is full equal to that of medium pneumatic and hydraulic breakers. Its
compact design and low weight allow quick and easy access to the works
site. The unique vibration dampening system makes for smooth operation.
The large air filter ensures longer life and greater reliability, even
in hot and dusty conditions. Starts easily in all kinds of weather.
- Easy to transport/store.
- No separate power unit to transport,
no hoses and no freezing problems.
- Self-lubricating and runs for over an
hour on four-tenths of a gallon of fuel.
Applications:
- Drives all kinds of posts, anchors, sockets,
ground rods and stakes.
- Can break up concrete, rocks and frozen
ground.
- Tamps asphalt, earth, stone and sand
- Can dig through frozen earth, hard clay or
rocky terrain
Cobra mk1 Breaker (340-2) |
Enlarge
Cobra Tools |
| PL-3 |
 |
The 53 lb. PL-3 post puller
delivers 3 tons of pressure to
easily pull posts up to 4" x 6".
The PL-3 works with a chain or
any of our 3 puller attachments.
Works on round, square, channel
or wood posts.
(432-3)
Add To Cart |
| |
|
| Truck-Mounted Post Puller |
Enlarge
|
This truck-mounted hydraulic post
puller is available in both a regular
and heavy duty version.
The regular duty post puller
generates 10,000 lbs. of pulling
force and has a telescoping reach
of 92 inches from the pivot point. |
This system requires a 3⁄4 ton or
heavier truck for mounting on the
front bumper. The regular duty post
puller is available without the
hydraulic pump for trucks that have
existing hydraulic systems.
The heavy duty post puller generates 30,000 lbs. of pulling force and has a reach of 119
inches from the pivot point. This system requires a 24,000 lb. G.V.W. vehicle with a
hydraulic system of 4-6 G.P.M. at 2,500 P.S.I. Both the regular and heavy duty pullers are
easily operated by one person. An added safety advantage of eliminating personal injury,
such as back strain, makes this product a wise investment for any sign shop.
- Regular Duty Puller without Hydraulic Pump (2354-1)
- Regular Duty Puller with Hydraulic Pump ( 2354-3)
- Heavy Duty Hydraulic Puller (2354-2)
|
| |
|
PP10 Post Puller Incorporates two methods to solve your post pulling problems. Use the gripper jaws to grasp the post on any convenient surface. Or use the enclosed chain to wrap around the post.
|
34-111 |
Add To Cart |
| |
|
|
|
 |
SW-1 V-Loc Galvanized SteelWedge
The V-LOC wedge is steel tubing made to ASTM A-500, Grade B specifications, then press formed into shape. |
34-4 |
Add To Cart |
| |
|
|
|
| |
|
|
|
 |
HD-1 Hand Drive Cap for Sledge Driving
|
34-11 |
Add To Cart |
| |
|
|
|
 |
Shank Power Tool, PS-1-10, 1" Hex x 4 1/4" |
34-19 |
Add To Cart |
| Shank Power Tool, PS-1-18, 1 1/8" Hex x 6" |
34-21 |
Add To Cart |
| V-Loc Power Drive Tool, PS-1-14, 1 1/4" Hex x 6" |
34-6 |
Add To Cart |
| V-Loc Power Drive Tool, PS-1-78, 7/8" Hex x 3 1/4" |
34-20 |
Add To Cart |
| V-Loc Power Drive Tool, PS-1-79, 7/8" Hex x 4 1/4" |
34-9 |
Add To Cart |
 |
Wedge Insert for High Stress Conditions
|
2986-1 |
Add To Cart |
|
Streetsigns TOC | Luminaires TOC | Poles TOC | Posts TOC
TRAFFIC
AND PARKING CONTROL CO., INC.
800 WALL STREET
ELM GROVE, WI 53122
PHONE: 262-814-7000
FAX: 262-814-7017
TOLL FREE: 1-800-236-0112
TOLL FREE FAX: 1-800-444-0331
TAPCO, Inc. Copyright ©
2008
Streetscapes from TAPCO |
