eACCESS Switching Hub

eACCESS Switching Hub

eAccess brings Ethernet communication to the Edge2 family of video detection products. Capable of supporting industry standard 10/100Base-T, Vantage eAccess enables remote access to Vantage video detection processors via true 802.3 compliant TCP/IP interface. Access to Vantage video detection processors can now be accomplished over cable modem, DSL modem, or local area networks.

Vantage eAccess Ethernet port enables MPEG-2 streaming video to be viewed on a personal computer using widely available internet browsers. Remote configuration and diagnostics can also be conducted using the browser-based remote access firmware embedded within Vantage eAccess.

Part Number 1639-eACCESS

• Central switching point (for both manual and remote switching). Designed specifically for the Vantage Edge2 video detection system
• Plugs into any standard rack with 12 or 24 volts DC
• Accommodates up to four video source inputs
• Accommodates up to four expansion devices
• USB mouse and trackball support
• EIA-232 serial communication port
• Built-in industrial hardened 56k modem with standard RJ-11 connector
• High intensity LED status indications
• Perfect addition for seamless VRAS integration

• Designed specifically for Vantage Edge2 video detection processors
• 4 BNC connectors for video input (via DB15 spider cable)
• 1 EIA-232 local access port
• USB Mouse port
• 1 BNC composite video out connector
• 7.0" long, 4.5" high, 2.3" wide (17.8 cm long, 11.4 cm high, 5.8 cm wide) 0.64 lbs. (0.29 kg)
• Temperature : -35° F to +165° F (-37° C to +74° C)
• Humidity: 0% to 95% non-condensing
• Vibration: 0.5G, 3 axes, 5-30 Hz
• Shock: 10G in all 3 axes
• 12/24 VDC (500/260 milliamps)