BLINKERSIGN® | DIGITAL | FEDERAL / GSA | GLOBAL EXPORT | GREEN | LED PRODUCTS | PARKING | SAFETY | SIGNALS | SIGNS| STREETSCAPE | TRAFFIC CONTROL | V-LOC | WORK ZONE | HOME | CONTACT
  TRAFFIC & PARKING CONTROL CO., Inc.        1.800.236.0112
 

SA Polycarbonate Signals from TAPCO pdf pages - 4-7
TOP TOC INDEX MORE INFO. SEARCH
SA Polycarbonate Signals from TAPCO

Features:

  • LED-Ready
  • Meets or exceeds ITE specifications.
  • Design provides minimum weight but maximum rigidity and strength.

Material- The housing, door and visor are injection molded of ultraviolet stabilized, pre-colored opaque polycarbonate.

Housing-One piece unit with serrations in 5° increments at each end. Each housing has provisions for mounting two terminal blocks and attaching back plates. Housings may be fastened together to make multi-section signals. The 8" and 12" housings can be intermixed to form combination signals.

Door - One piece polycarbonate unit equipped with stainless steel hinge pins. Stainless steel thumbscrews hold the door against the housing.

Visor - The removable twist-on visor is secured to the door with stainless steel hardware. Cut-away or tunnel visors are available.

* Incandescent applications only.

Reflector * - A separately hinged, ALZAK® reflector is standard. Glass is also available.

Lens * - Conforms to ITE specifications. The standard lens is polycarbonate, capable of withstanding illumination by a standard traffic signal lamp without physical distortion. A glass lens is also available.

Lens Gasket * - A molded one piece gasket is used to seal the lens to the reflector and door to form a sealed unit.

Lamp Socket * - Insulated, pre-focused and may be rotated for positioning the lamp filament without using tools.

Positive Positioning - Positive positioning and locking is achieved through the use of serrated brackets, mast arm or span wire fittings.

The standard signal is composed of three injection molded polycarbonate body sections containing the optical unit, lens, door and visor. The basic construction design provides minimum weight combined with maximum rigidity and strength. Coloring is molded in all the way through: therefore, there is no peeling, no corrosion, and scratches will not show. It meets or exceeds ITS specifications.

Visor Color
XX Color
03 Black
04 Yellow
05 Green

TOP TOC INDEX MORE INFO. SEARCH
SA Polycarbonate Signals from TAPCO
Enlarge
SA Polycarbonate Signals from TAPCO
Enlarge
Weights 8" (200mm) 12" (300mm)
Single sections with visor (approx.) 4 lbs. (1.81 kg) 7 lbs (3.18kg)
Housing 1 lb. 6.4oz (.64kg.) 2 lbs.5.2oz (1.05kg)
Door 7.5 oz (.21kg) 15.1 oz. (.43kg)
Ring 3.5 oz (.10kg) 6.6 oz (.19kg)
TOP TOC INDEX MORE INFO. SEARCH

Incandescent Assembly
(see table below for reference numbers)

SA Polycarbonate Signals from TAPCO
Enlarge

Standard Head Assembly
(see table below for reference numbers)
SA Polycarbonate Signals from TAPCO
Enlarge

LED Assembly
(see table below for reference numbers)
SA Polycarbonate Signals from TAPCO

TOP TOC INDEX MORE INFO. SEARCH
Reference#
Description
Incandescent Applications LED Applications
8" (200mm) 12" (300mm) 8" (200mm) 12" (300mm)
1 Signal housing - yellow
KB19111 KB4816 KB19111 KB4816
Signal Housing - Black KB19112 KB4817 KB1912 KB4817
2 Screw (10-24 hex screw) 0140716 0142716 0141716 041716
3 Flange nut 0150715 0150715 0150715 0150715
4 Door hinge pin K-1196 K-1196 K-1196 K-1196
5 Thumbscrew, SS 014212 014212 014212 014212
6 Thumbscrew washer, SS 0155924 0155924 0155924 0155924
7 Hole plug PHP16 PHP16 PHP16 PHP16
8 Socket holder wire (bail)
A701862 A844335 N/A N/A
Bail wire spring A844337 A844337 N/A N/A
9 Socket with brass screw shell A702029 A702029 N/A N/A
10 Lead Assy. w/spade lugs, red A844252 A844252 N/A N/A
Lead Assy. w/spade lugs, yellow A844251 A844251 N/A N/A
Lead Assy. w/spade lugs, green A844250 A844250 N/A N/A
11 Socket Gasket A844249 A844249 N/A N/A
12 Reflector (Alzak) A844245 A844245 N/A N/A
13 Reflector gasket (Alzak) A844246 A844246 N/A N/A
14 Die-cast reflector ring A702159 A702158 N/A N/A
15 Lens, poly - red PBL240 PBL246 N/A N/A
Lens, poly - yellow PBL241 PBL248 N/A N/A
Lens, poly - green PBL239 PBL247 N/A N/A
16 Lens, arrow mask PBL03314 PBL286 N/A N/A
18 Lens gasket A844248 A844328 N/A N/A
19 Lens clip - generic A84436155 A84436155 N/A N/A
20 Lens clip screw 0133029 0133029 N/A N/A
21 Signal door, yellow PDM2028 PDM2031 PDM2028 PDM2031
Signal door, black PDM2027 PDM2030 PDM2027 PDM2030
22 Visor - tunnel A700119-XX A700120-XX A700119-XX A700120-XX
Visor - cutaway A7800468-XX A700469-XX A7800468-XX A700469-XX
23 Visor Screw, SS (10-32 X 3/8" 0135021 0135021 0135021 0135021
24 Terminal block, 6 pos. spade type PCT100 PCT100 PCT100 PCT100
25 Terminal block screw, SS A702121 A702121 A702121 A702121
28 LED bulb - red N/A N/A 220-24 220-5
LED bulb - yellow N/A N/A 220-16 220-10
LED bulb - green N/A N/A 220-22 220-19
LED arrow bulb - red N/A N/A N/A 220-18
LED arrow bulb - yellow N/A N/A N/A 220-14
LED arrow bulb - green N/A N/A N/A 220-17
           
TOP TOC INDEX MORE INFO. SEARCH

Order by phone 1.262.814.7000 Toll Free 1.800.236.0112
or Order by Fax 1.262.814.7017 Toll Free 1.800.444.0331
Traffic and Parking Control Co., Inc
800 Wall Street Elm Grove, WI 53122
© 2008 All Right Reserved