Traffic and Parking Control Co., Inc. - Traffic Signal Division, LED ARROWS,arrow leds,led,led beacon,led electronics,led flashers,led lights,led products,led safety light,led signs,led traffic light

	TRAFFIC & PARKING CONTROL CO., Inc. 1.800.236.0112

pdf pages 31, 35

TOP

TOC

INDEX

MORE INFO.

Dialight LED Arrow (Meets 1999 ITE Specifications)

Enlarge

90% reduction in power vs. incandescent
Long life: up to 10 times longer than incandescent
Hard coated lenses for abrasion resistance
60 Month warranty on materials and workmanship
Wide selection of products
Easy to install into existing signal enclosure

Specifications:

Fuse and transient suppressor incorporated for line and load protection1
Power factor greater than 0.92
Total Harmonic Distortion <20%2
Meets FCC Title 47, Subpart B, Section 15 regulations for electrical noise
Conforms to NEMA Moisture Resistance STD. 250-1991 for Type 4 enclosures (ITE 6.4.6.2 Moisture Resistance)
Provided with quick connect terminals. Space tab adaptor.
Operating Voltage Range:
80VAC TO 134 VAC (120VAC nominal)
Operating Temperature Range: -40°C to +74°C

1 Bi-Modal Green/Amber has transient suppressor only
2 Non applicable Bi-Modal Green/Amber

12" (300mm) - 120 Volt Arrows
TAPCO Part No.	Manufacturer Part No.	Note	Description	Volts	Typical Wattage @ 25ºC	Dominant Wavelength (nm)	Lens Tint
220-18	432-1314-001	1, 2	Red, 3 Row	120VAC	6.5	622	Red
220-14	431-3334-001	1	Yellow, 3 Row	120VAC	8.8	590	Yellow
220-17	432-2324-001	1	Green, 3 Row	120VAC	7.0	505	Clear
1 Approved by Caltrans 2 Meets or exceeds IE VTC Part 2

LED Arrows (Meets 2005 ITE Specifications)

Enlarge

Lighting Uniformity • ITE Conformity

Features / Benefits

Uniform non-pixelated appearance
Expanded view radiation pattern meets ITE VTCSH-3 LED Arrow Specification
90% reduction in power vs. incandescent
Long life: up to 10 times longer than incandescent
Fuse and transient suppressor incorporated for superior line and load protection
Hard coated lenses for abrasion resistance
Easy to install into existing signal enclosure

Specifications:

Operating Voltage Range: 80VAC TO 135 VAC (120VAC nominal)
Operating Temperature Range: -40°C to +74°C
Meets FCC Title 47, Subpart B, Section 15 regulations for electrical noise
Conforms to MIL-STD-810F for blowing rain
Conforms to MIL-STD-883, Test Method 2007, for mechanical vibration
Conforms to MIL-STD-883, Test Method 1010, temperature cycling requirements
Provided with quick connect terminals and spade adapters
All products traceable by serial number
Luminance uniformity and color uniformity exceed ITE PTCSI-2 LED Pedestrian Signal Specification requirements
Transient Suppression exceeds ITE PTCSI-2 LED Pedestrian Signal Specification requirements and meets the following standards:
- NEMA TS-2 Sec. 2.1.6 and Sec. 2.1.8
- IEC 1000-4-5, 3KV, 2 ohm source impedance
- ANSI/IEEE C62, 41-2002; IEC 61000-4-12,6KV, 200A, 100KHz ring wave

12" (300mm) - 120 Volt Arrows
TAPCO Part No.	Manufacturer Part No.	Color	Lens Type	Typical Wattage @25° C	Dominant Wavelength (nm)	Peak Minimum Maintained Luminous Intensity (cd/m2)
2406-6	432-1314-001X	Red	Tinted	7	625	59
2406-5	431-3334-001X	Yellow	Tinted	9	590	146
2406-4	432-2324-001X	Green	Tinted	7	500	76
* Currently yellow arrows are not eligible

Order by phone 1.262.814.7000 Toll Free 1.800.236.0112
or Order by Fax 1.262.814.7017 Toll Free 1.800.444.0331
Traffic and Parking Control Co., Inc
800 Wall Street Elm Grove, WI 53122
© 2008 All Right Reserved