|
| Replacement Parts - Post Top Closure Kit |
Enlarge |
Description |
No. Required |
Color |
Part Number |
| Post Top Closure Kit |
1 |
Yellow |
122-BK01030A |
| Post Top Closure Kit |
1 |
Unpainted |
122-BK01030AS |
| Replacement Parts - Side-of-Pole Mounting Kit |
Enlarge |
Description |
No. Required |
Color |
Part Number |
| Mounting Assembly Kit |
1 |
Yellow |
122-FR1JPY |
| Mounting Assembly Kit |
1 |
Black |
122-FR1JPB |
| Replacement Parts - Side-of-Pole Mounting |
|
| |
Item# |
Description |
No. Required |
Color |
Part Number |
Enlarge |
1 |
Pinnacle |
2 |
Yellow |
290-SE0499 |
| Pinnacle |
2 |
Black |
290-SE049902 |
| 2 |
Neoprene Washer - 1-½" |
1 |
— |
290-SE0354 |
| 3 |
Galvanized Hex Locknut |
2 |
— |
1168-5 |
| 5 |
Zinc Plated 1.5" x 2" Nipple |
2 |
— |
217-3 |
| 6 |
Poly Mounting Bracket |
2 |
Yellow |
122-PDM405 |
| Poly Mounting Bracket |
2 |
Black |
122-PDM442 |
| Replacement Parts - Post Top Mounting Assembly |
|
| |
Item# |
Description |
No. Required |
Color |
Part Number |
Enlarge |
1 |
Pinnacle |
2 |
Yellow |
290-SE0499 |
| Pinnacle |
2 |
Black |
290-SE049902 |
| 2 |
Neoprene Washer - 1½" |
1 |
— |
290-SE0354 |
| 3 |
Galvanized Hex Locknut |
2 |
— |
1168-5 |
| 5 |
Zinc Plated 1.5" x 2" Nipple |
1 |
— |
217-3 |
| 6 |
Raw Collar, Aluminum with Locknut and Nipple |
1 |
— |
1168-8 |
| Miscellaneous Hardware - Rigid Signal Mounting |
Enlarge |
Aluminum mounting systems provides secure mounting of signals. The kit is supplied with 12" nipples and universal hubs. This system can be purchased as a kit or each component individually.
|
| Miscellaneous Hardware - Roger Wrench |
Enlarge |
This Roger wrench provides a flexible convenient
tool that fits a wider range of nuts. The Roger
wrench fits all nut sizes for the spanner wrench as
well as the hexagonal nuts.
|
| Miscellaneous Hardware - All Thread Nipple |
 |
This all threaded nipple has a 1½" ID and is 2" long. It is available in either aluminum or steel.
- Part Number 290-SE0309-2 Aluminum
- Part Number 122-PGP15 Steel
|
| Miscellaneous Hardware - 90° Elbow |
Enlarge |
This iron elbow is 1½" ID
and is threaded at both ends.
|
| Miscellaneous Hardware -Nipple |
 |
This is a 5" nipple with an ID of 1½" and 1" of threading at each end.
It is available in aluminum, steel, and schedule
80 aluminum. |
- Part Number 290-SE0436-5 Aluminum
- Part Number 1586-13 Steel
- Part Number290-SE0475-5 Schedule 80 Aluminum
Also Available 10" Aluminum Nipple threaded on both ends
- Part Number 290-36 Aluminum
|
| Miscellaneous Hardware - Tee |
 |
This 1½" ID iron tee is
threaded at all three openings and is 37/8" across.
|
| Miscellaneous Hardware - Locknut |
 |
Locknut iron hex
galvanized 1.5"
|
| Miscellaneous Hardware - Mounting Collar |
Enlarge |
This (left) aluminum one way mounting
collar is used for side of pole mounting applications. Designed for 41/2" OD poles
and is shipped with stainless steel bolts,
washers and locking nuts.
This (right) aluminum two way mounting collar is used for side of pole mounting applications. Designed for 41/2" OD poles and is
shipped with stainless steel bolts, washers, and locking nuts.
|
| Miscellaneous Hardware - Ornamental Mounting Kit |
Enlarge |
These side of pole mounting kits are
available for 1 or 2 way mounting
assemblies and include all necessary
hardware.
-
Part Number 373-One-Way
-
Part Number 373-Two-Way
|
| Miscellaneous Hardware - Stiffening Plates (For additional support) |
Enlarge |
Used at the bottom of signals when mounted to the top of poles. Helps maintain rigidity in strong winds and other environmental conditions. Also strengthens the signal when multiple heads are arranged vertically.
Available in yellow or ready to paint to meet any requirements and will fit either 8" or 12" signal heads.
- Part Number 122-K1188 – 2" Hole Yellow
- Part Number 122-K1241 – 2.8125" Hole Yellow
- Part Number 290-1188R – 2" Hole Raw
- Part Number 290-1241R – 2.8125" Hole Raw
|
| Miscellaneous Hardware - Grommets |
Enlarge |
These grommets are available in various sizes to accommodate pole thicknesses and are used to protect wires when pulled through drill holes. Also prevents water from seeping into poles.
Available in sizes -1" ID for 3/8" thick pole or 1/8" thick pole.
- Part Number 510-2 Type 1 - 1" ID, 15/8" OD, 1/8" Gap
- Part Number 510-3 Type 2 - 1" ID 15/8" OD 1/4" Gap
- Part Number 510-4 Type 3 - 1" ID 15/8" OD 3/8" Gap
|
| Miscellaneous Hardware - Shims |
Enlarge |
These shims are available in various widths and lengths to straighten vertical mounting poles.
Sold individually.
Sizes 1/8" thick and 1/16" thick
- Part Number 159-3 1/16"
- Part Number 159-4 1/8"
|
| Miscellaneous Hardware - Flared Leg Bracket |
 |
Threaded 5/16" - 18 center hole saves time. Slot length is .81", accepts strap up to 3/4". Secure to 4" O.D. or larger pole with strap.
|
| Miscellaneous Hardware - 3/4" x 5/16" Bolt |
 |
Hex Head, Stainless Steel. Fully threaded, solidly anchors sign with metal washer.
|
| Strapping Tools and Hardware - Painted Stainless Steel Strapping |
Enlarge |
Our painted stainless steel strapping is powder-coated
for durability. It is also available in other colors,
lengths and widths by special order, and minimum
quantities may apply. |
| Part Number |
Color |
Dimensions |
| 497-3 |
Black |
3/4" x .030" x 39" |
| 497-4 |
Brown |
3/4" x .030" x 39" |
| 497-5 |
Green |
3/4" x .030" x 39" |
| Strapping Tools and Hardware - Stainless Steel Strapping |
 |
3/4" x 200' x .020" coil in dispensing box.
3/4" x 200' x .025" coil in dispensing box.
- Part Number 35-4 (Required for signal mounting.)
3/4" x 100' x .030" coil in dispensing box.
|
| Strapping Tools and Hardware - Stainless Heavy Duty Buckle |
Enlarge |
For 3/4" width strapping.
|
| Strapping Tools and Hardware - Stainless Strapping Clip |
 |
For 3/4" width strapping.
|
| Strapping Tools and Hardware - Heavy Duty Strapping Tool |
Enlarge |
Windless Ratchet tensioner for 3/8" to 3/4" strapping to .030 thickness. Built-in Cutter and Hammer for wing seal closing.
|
| Strapping Tools and Hardware - Strap Cutter |
Enlarge |
Coil spring keeps cutter open to accept strap.
|
| Strapping Tools and Hardware - Standard Strapping Tool |
Enlarge |
Forged with tensioning capability of over 2400 lbs. Apply bands, buckles, strapping and clamps. Built-in cutter.
|
| Astro-Brac |
Enlarge |
The Astro-Brac in its various configurations provides a universal mounting system for mounting signs, cameras, and any size or combination of signals to any size or shape mast arm or pole. This mounting system allows for a quick and easy installation for band, cable or tenon mounts. |
Enlarge |
| One Way Signal Band Mount |
This mount is designed to accommodate all traffic signals, with the exception of the
optically programmed. It is supplied with the AB-3004 Band Mount Clamp Kit
featuring all-axis adjustability. The 46" standard gusseted tube with the vinyl insert
will accommodate all signal combinations up to 3 section 12". The 58" and 74" lengths
are available for 4 and 5 section combinations. Please specify number of signal heads
and band length requirements.
First X designates number of sections, Second X designates band length. |
| Options |
| Signal Section: 1, 2, 3, 4 or 5 |
| Band Length - 29", 36", 42", 48" or 56" |
| Stainless Upgrade |
| Options |
| Signal Section: 1, 2, 3, 4 or 5 |
| Cable Length - 62", 84" or 96" |
| Cable Length |
Pole Diameter |
| 62" |
4"-8.6" |
| 84" |
4"-11.6" |
| 96" |
4"-14.6" |
| Band Length |
Pole Diameter |
| 29" |
4"-8.6" |
| 36" |
4"-10.8" |
| 42" |
4"-12.7" |
| 48" |
4"-14.6" |
| 56" |
4"-17.2" |
| Tenon Mount Kit |
Enlarge |
Tenon mount fits 1.9" to 4.5" dia. Pole Can be used with Astro Brac Sign (AB-0105) or Signal (AB-0116) Brac
|
| Astro-Sign Brac |
Enlarge |
These versatile mounting systems are designed to facilitate mast arm and pole mountings of flat sheet signs. May be used vertically or horizontally and is available with band or cable mount. When used in pairs for longer signs, or in single units for small signs allow adjustability for proper aiming and leveling.*
* Rule of thumb: 1 bracket per 16 sq ft of sign.
First X designates tube length
Second X designates band length |
Enlarge |
Item 1-2 Options |
Enlarge |
| CTC Dimensions (see chart) |
| Band Length - 29", 36", 42", 48" or 56" |
| Stainless Upgrade |
| |
| |
| TUBE CTC |
SIGN |
| 9" |
15" |
| 12" |
18" |
| 15" |
21" |
| 18" |
24" |
| 24" |
30" |
| 30" |
36" |
| 36" |
42" |
| 42" |
48" |
| 48" |
54" |
| 60" |
66" |
| 66" |
72" |
| 72" |
78" |
| Astro Sign-Brac Assembly |
Enlarge |
The Astro Sign Brac Assembly is for overhead street name signs
available in many lengths and sizes. See charts for tube and band
lengths. Suggested maximum sign face of 16 sq ft per bracket.
Available in cable or band mount to accommodate most signs.
First X designates tube length Second X designates band length |
| Options |
| CTC Dimensions (see charts below) |
| Band Length - 29", 36", 42", 48" or 56" |
| Stainless Upgrade |
| Paint |
| SIGNS 1'-6" to 3'-0" Long |
Enlarge |
SIGN LENGTH |
TUBE LENGTH |
CTC (A) |
| 1'-6" |
16" |
12" |
| 2'-0" |
22" |
18" |
| 2'-6" |
28" |
24" |
| 3'-0" |
34" |
30" |
| Maximum Sign Height 48” |
| SIGNS 8' to 10' Long |
Enlarge |
SIGN LENGTH |
TUBE LENGTH |
CTC (A) |
(B) |
(C) |
| 8'-6" |
100" |
96" |
19" |
20" |
| 9'-0" |
106" |
102" |
20" |
22" |
| 9'-6" |
112" |
108" |
21" |
24" |
| 10'-0" |
118" |
114" |
22" |
26" |
| Maximum Sign Height 16" |
| SIGNS 8' to 10' Long |
Enlarge |
SIGN LENGTH |
TUBE LENGTH |
CTC (A) |
(B) |
| 3'-6" |
40" |
36" |
12" |
| 4'-0" |
46" |
42" |
14" |
| 4'-6" |
52" |
48" |
16" |
| 5'-0" |
58" |
54" |
18" |
| |
5'-6" |
64" |
60" |
20" |
| |
6'-0" |
70" |
66" |
22" |
| |
6'-6" |
76" |
72" |
24" |
| |
7'-0" |
82" |
78" |
26" |
| |
7'-6" |
88" |
84" |
28" |
| |
8'-0" |
94" |
90" |
30" |
| Maximum Sign Height 24" |
Order by phone 1.262.814.7000 Toll Free 1.800.236.0112
or Order by Fax 1.262.814.7017 Toll Free 1.800.444.0331
Traffic and Parking Control Co., Inc
800 Wall Street Elm Grove, WI 53122
© 2008 All Right Reserved |
