These radios are designed to provide a reliable wireless interconnect solution for all closed loop traffic controller designs. All radios include ControlPAK™ software; which provides compatibility with all major traffic controllers. Radios connect directly to the traffic controllers and provide a transparent and reliable wireless closed loop connection.

In addition, these radios are designed to extend existing copper/ hardwire systems and provide a wireless interconnect solution for all traffic controllers. Radios include multiple data interfaces, such as RS232 and 2 or 4 Wire FSK copper.

These unique data interfaces allow radio to establish a hybrid system consisting of FSK copper and wireless communications. The master radio
is connected directly to the existing FSK copper line. 5100S shipped with lightning arrestor, RF cable and AC power supply adaptor. 5100R shipped with RF cable, lightning arrestor and data cable.

Advantages

• Saves you time and money.
• Overcomes distance, disturbance and topography.
• Expands existing systems with wireless solutions.
• Accommodates multiple data interfaces into systems.
• Expands existing hardwire systems.
  
  
  
• Part No. 2444-1 5100R
• Part No. 2444-5 5100S 2 Wire
• Part No. 2444-6 5100S 4 Wire
• Part No. 2444-4 5200
• Part No. 2444-3 1018A Cable

Designed specifically for ON/OFF control and detection applications. These radios feature bi-directional or single directional communications and the ability to confirm switch closure at a remote site. Using the I/O is extremely simple with flexible software giving I/O routing infinite possibilities. This comprehensive software package includes a Configuration Utility, Remote Maintenance capabilities and Wireless Link Diagnostic features. A Spectrum Analyzer is also included, allowing end user to determine exact noise levels and select optimal operating frequencies.

With usable bandwidth up to 108 Mbps, the COMMPAK Broadband 5.8 GHz system is designed for long range outdoor broadband backhaul applications. Point-to-point and point-to-multipoint topologies are supported.

These hardened outdoor units are available with an integrated 23dB panel antenna or a connectorized version for external antennas. The COMMPAK Broadband 5.8 system allows you to extend your network, add video surveillance at remote sites and create MESH networks in the most challenging urban environments.

Complete weatherproofing and all welded joints assure long trouble free life. With pigtail feet that will withstand a 50 pound pull and two large stainless steel U-Bolts that guarantee sure mounting you will never have to worry about adjustments or loose parts.

Frequency, MHz : 902-928
Length in.:   53.5
Weight, lb. :  2.31
Number of Elements: 13
Gain dBd: 13

• Part Number 1343-3

Power Splitter - 900-1100MHz
2-way Power Divider, max input 500 Watts, 3dB output loss to each port, 22dB insertion loss.

Specifications

• RF Connector Type: N.
• Frequency Band: 900 Mhz.
• Connector Gender: Female
  
  
• Part Number 1343-5

Standard Data Transmission Omnis are fully decoupled antennas built on a copper laminate and housed in 0.100 inch wall fiberglass housings. They may be mounted right side-up or tipped upside down depending upon the desired pattern. They also feature a very versatile clamp mounting system that will fit most every situation you will encounter.

Frequency, MHz: 896-960
Type (Female): N
Height in. (cm): 303/4 (78)
Weight lb. (kg): 1.19 (0.53)
W/sur Area ft2 (m2): 1.76 (0.016)
W/survival mph (kph): 125 (200)
Pigtail in. (cm): 23 (0.016)

• Part Number 1343-4

Frequency Range:
125MHZ to 1 GHZ.
VSWR:
≤ 1.1:1 over frequency range.
Insertion Loss:
≤ 0.1dB over frequency range.
Max Power:
375W @ 125MHz decreasing to 50W @ 1GHz.
Turn On:
600Vdc ± 20%.
THROUGHPUT ENERGY:
≤ 220μJ for 8/20μs waveform.

• Part Number 2444-2

1/2" Standard Cable, Standard jacket
1/2" Foam Dielectric - 50ohm

• Part Number 1343-1

This RingFlare N Male connector has a silver plated body with gold plated pins.  The maximum length of the connector is 3.0 inches and the maximum diameter is .86 inches. The inner contact attachment is captivated.

• Part Number 1343-2