Pedestal Pole
Standard 4.5" OD aluminum pedestal pole. Provides years of rust-free service. Available in various lengths depending on your needs. Supplied with one end threaded for easy installation into pedestal base.

Part Numbers:
373-8 8' Schedule 40 pipe raw aluminum 373-880 8' 80 pipe raw aluminum
373-10 10' 40 pipe raw aluminum 373-1180 11' 80 pipe raw aluminum
373-13 13' 40 pipe raw aluminum 373-1380 13' 80 pipe raw aluminum
373-15 15' 40 pipe raw aluminum 373-1580 15' 80 pipe raw aluminum

NOTE: To determine the pole length required for your application the bottom of the sign or signal needs to be 7ft to the bottom of the base per MUTCD standards.

Bolts are available in 18", 42" and 60" galvanized steel. Set of 4 includes lock washer and nut.

• Part Number 122-UA242 3/4" x 18"High Strength Steel Anchor Bolt
• Part Number 3177-42 1" x 42" High Strength Steel Anchor Bolt
• Part Number 3177-60 1" x 60"High Strength Steel Anchor Bolt

TAPCO’s TP-358 cast aluminum pedestals mount on a concrete base attached by four internal anchor bolts embedded in the base. The pedestal has a large 8.5" square hand hole cover allowing access to the interior of the base for ease of cable splicing and anchor bolt attachment. Available unpainted, Federal Highway yellow, black or color of your choice.

Part Number 203-14 Unpainted
Part Number 203-15 Yellow
Part Number 203-12 Black

Fits all standard 4.5" OD poles. Galvanized for maintenance free service. Attaches easily with 3 mounting set screws included.

Part Number 203-10

Flasher Cube
Economical 2 circuit panel mount flasher cube may be used for flashing two tungsten lamps, LED, or inductive loads. Measuring just 1.75 x 2.25 inches, the cube is built to withstand rugged conditions and can be installed inside signal head.

Part Number 1216-2

Compact cabinet-mounted controller remotely activates one or more beacons at up to 1 mile away. Utilizing a proprietary optimized communications protocol for maximum reliability and security. Can be activated using any number of triggering devices.

Part Number 3204-1

The TAPCO solid-state flasher is designed and built to meet NEMA specifications. Each flasher contains two individually replaceable modules enclosed in a dust resistant metal enclosure, providing mechanical protection and excellent heat sinking for the modules.

The modules are easily accessible with a screwdriver. Shown with mounting bracket and plug in module which are each sold separately. Brackets mount easily into either cabinet with all holes predrilled and ready to accept plug in module. All components include necessary screws.

Flasher Part Number 71-1
Bracket Part Number 106-6
Socket Part Number 55-20

Clocks can be ordered AC, DC, or AC/DC. AC & DC clocks have up to 4 relays, whereas the AC/DC model has only one. The clock can establish school year program based on school calendar and can establish exceptions such as holidays and other events.

Programs easily with LCD lighted display. Programmable for momentary operation of up to 255 seconds. Automatically adjusts for leap year and daylight savings time. Backup power-Capacitive-168 hours minimum. Shipped with standard cable

Dimensions: 8.25" H x 4.25" W x 1.75" D
Part Number 27-3

Universal Flasher Cabinet (110V)
Provides weather-tight storage of flashers and timers.

• Can be mounted either through the body or off the back.
• Cover plates are provided to plug unused mounting holes.
• Comes standard with police style skeleton lock and key for security.

Part Number 290-SP5150

Pole Mounting Clamp
Mounts cabinets securely to the side of all standard 4.5" poles. Is shipped complete with all necessary mounting hardware and rubber gasket for additional water protection.

Part Number 290-5

Wood Pole Mounting Kit
This mounting kit will securely mount a cabinet to a wooden pole. Kit includes two brackets, all necessary hardware and a rubber gasket.

Part Number 290-28

Solar Cabinet
Galvanized metal cabinet provides room for all necessary flashers and timers as well as two back-up batteries. Measures 26.5" H x 15.75" W x 14" D. Easily mounts to 4.5" pole (sold separately) with pre-drilled holes on back. Locks securely with provided standard police key. Door has weather tight gasket. Banding mounts available.

Part Number 27-6 50 Watt

Solar Panel
Solar panel for powering flashing beacons. Available in various sizes to accommodate a wide range of uses. Call for information regarding sizing requirements and pricing for your application. 1.800.236.0112

Band Mounting Bracket
For side of pole mounting of cabinets. Can accommodate poles up to approximately 9" with standard bands. Longer bands are available for larger mounting applications. Bracket measures 5" x 3.75" and is supplied with two 29" metal banding straps complete with lock-tight screw closures.

Part Number 27-10