Traffic & Parking Control Co., Inc. TAPCO - V-LOC Post Anchor Systems for Square Posts

	V-LOC FOR SQUARE POSTS	search

V-LOC PERMANENT SOCKETS FOR SQUARE POSTS

175 Models for 1-3/4" x 1-3/4" square posts

Models for
square Posts

Weight
(Lbs.)

For Post
Dimens. (inch)

Leg Angle
Dimensions (Inch)

Stabilizer Fin
Dimensions (Inch)

Posts are shown for illustration only (click on image to enlarge)
	Concrete V-Loc (VS1 models) Concrete V-Loc with bottom plate and longer leg (VS1-P models)
	Earth or Asphalt V-Loc (VS2 and VS3 models) Clean-out Bar V-Loc with 3/4" x 7" bar (all models with a “B" suffix)
All Square model V-Locs (VS) have a Stabilizer Bolt (shown at the bottom of the page), to ensure that longer posts remain locked in place, even in severe wind conditions

175 Models for 1-3/4" x 1-3/4" square posts

175-VS1	4.40	1-3/4	2 x 2 x 1/4 x 8	8 x 9-1/4 x 12 ga.
175-VS1P	4.90	1-3/4	2 x 2 x 1/4 x 12	8 x 9-1/4 x 12 ga.
175-VS2	10.00	1-3/4	2 x 2 x 1/4 x 24	10 x 12 x 12 ga.
175-VS3	11.60	1-3/4	2 x 2 x 1/4 x 30	10 x 12 x 12 ga.
175-VS3B	12.50	1-3/4	2 x 2 x 1/4 x 30	10 x 15 x 12 ga.

200 Models for 2" x 2" square posts

200-VS1	5.00	2	2-1/2 x 2-1/2 x 1/4 x 8	8 x 9-1/4 x 12 ga.
200-VS1P	5.50	2	2-1/2 x 2-1/2 x 1/4 x 12	8 x 9-1/4 x 12 ga.
200-VS2	12.80	2	2-1/2 x 2-1/2 x 1/4 x 24	10 x 15 x 12 ga.
200-VS2B	15.70	2	2-1/2 x 2-1/2 x 1/4 x 24	10 x 15 x 12 ga.
200-VS3	14.80	2	2-1/2 x 2-1/2 x 1/4 x 30	10 x 15 x 12 ga.
200-VS3B	15.70	2	2-1/2 x 2-1/2 x 1/4 x 30	10 x 15 x 12 ga.

225 Models for 2-1/4" x 2-1/4" square posts

225-VS1	5.00	2-1/4	2-1/2 x 2-1/2 x 1/4 x 8	8 x 9-1/4 x 12 ga.
225-VS1P	5.50	2-1/4	2-1/2 x 2-1/2 x 1/4 x 12	8 x 9-1/4 x 12 ga.
225-VS2	12.80	2-1/4	2-1/2 x 2-1/2 x 1/4 x 24	10 x 15 x 12 ga.
225-VS3	14.80	2-1/4	2-1/2 x 2-1/2 x 1/4 x 30	10 x 15 x 12 ga.
225-VS3B	15.70	2-1/4	2-1/2 x 2-1/2 x 1/4 x 30	10 x 15 x 12 ga.

250 Models for 2-1/2" x 2 1/2" square posts

250-VS1	6.40	2-1/2	3 x 3 x 1/4 x 8	8 x 10 x 12 ga.
250-VS2	18.10	2-1/2	3 x 3 x 1/4 x 30	8 x 10 x 12 ga.
250-VS3	20.60	2-1/2	3 x 3 x 1/4 x 36	8 x 10 x 12 ga.

300 Models for 3" x 3" square posts

300-VS1	6.40	3	3-1/2 x 3-1/2 x 1/4 x 8	8 x 10 x 12 ga.
300-VS2	22.00	3	3-1/2 x 3-1/2 x 1/4 x 30	8 x 10 x 12 ga.
300-VS3	24.00	3	3-1/2 x 3-1/2 x 1/4 x 36	8 x 10 x 12 ga.

Flexible Spring Post Base System (034-069):
Includes 175-VS2 V-Loc post anchor system with locking wedge; four 1/2" stainless steel bolts, washers and nylon insert lock nuts (shown on the right), post & spring assembly.

VISE-LOC STABILIZER BOLT AND EXTRACTOR HOLE

The Vise-Loc Stabilizer Bolt (shown at left) is now standard on all square model V-Locs, ensuring that posts remain locked in place. It is especially effective in severe wind conditions, and for longer posts. It is also an available option on all round and on u-channel models for an additional charge.

The Extractor Hole (shown at right, inset) is an available option on all V-Loc models for an additional charge. It allows for easier removal of the V-Loc from the ground with the use of a clevis and hook, not included. Ideal for temporary applications such as work zones.

TRAFFIC & PARKING CONTROL CO., INC. 800 WALL STREET ELM GROVE, WI 53122
PHONE: 262-814-7000 FAX: 262-814-7017 TOLL FREE: 1-800-236-0112 TOLL FREE FAX: 1-800-444-0331
September 29, 2008 © Traffic & Parking Control Co., Inc. 2008