User-Friendly Operation Modes
The POD500 Bar Code Ticket Dispenser is designed to provide the following operations:
Man-Readable:
This configuration will provide the ability to imprint a man-readable ticket number, date, time, facility code, fee number and lane number.
Bar Code:
This configuration will provide all of the features and functionality of the man-readable model, and in addition, incorporate the ability to print a one-dimensional bar code information on ticket.
User Friendly Programming
PDA Programming:
The POD500 Ticket Dispenser is capable of receiving commands and programming from a PDA. This can done in either on-line or mode off-line mode.
ScanNet® Programming
Federal APD's Central Parking Management Software, ScanNet® is recognized by this device.
All Programming and commands can be used to customize your selection criteria.
FEATURES:
- Flash Memory
- Infrared interface
- Weather proof
- Issues tickets within 1.5 seconds
- LCD display and push for ticket button
- Ethernet connectivity for flash programming.
- Handheld PDA interface Filed Programmable via PDA
Optional:
Specifications:
1. The POD500 Bar Code Ticket Dispenser is a revenue control device that provides a vend signal when a ticket is issued. The vend signal will cause a gate arm or other device to activate to allow patron to access parking facility.
2. Features/Functions
The POD500 Bar Code Ticket Dispenser provides the following configurations.
a. Man-Readable This configuration provides the ability to imprint a man-readable ticket number as it is issued. The printed characters include: ticket number, date, time, fee number, and lane number.
b. Bar Code. This configuration provides all of the features and functionality of the Man-Readable but in addition the ability to print bar code information on the ticket.
3. Dimensions
The POD500 Bar Code Ticket Dispenser cabinet is 10 inches W x 44 inches H x 17 inches D (254mm W x 118mm H x 431cm D)
4. Enclosure
a. General:
1. All cabinet components are constructed of aluminum 0.125 inches in thickness.
2. All internal mechanical components are constructed of galvanized steel.
3. All enclosure components are powder-coated to prevent corrosion.
4. The enclosure will have locks to prevent access from the outside.
b. Capabilities:
The enclosure is weather resistant so as to permit proper operation in all weather conditions.
c. Interface Features
1. Thermal Paper roll with approximately 3,000 ticket capacity with the 85cm ticket size.
2. Thermal Printer with cutter
3. Controller Board
4. Universal Power Supply
5. Heater and Thermostat
5. Patron Interface
a. Ticket Throat: Prominent and highly visible.
b. "Push for Ticket Button": the button in back-lit, weatherproof, in prominent location and highly visible.
c. Patron interface will provide message to indicated facility full or out of service conditions.
d. Patron Display is lit and weatherproof. The characters display will be large enough to be visible. The display will indicate time in either AM/PM or Military mode.
6. Hardware/Electrical
a. Controller Board
1. Controller board is a 68332 based board with I/O sufficient to operate device.
2. Interface is provided to allow in circuit programming of all devices (JTAG).
3. An RS 422 port for ScanNet management system is provided.
b. Power Supply
1. The unite operates on-line voltage 85 to 260 VAC, 40 to 6o Hz. it will provide 24VDC power.
c. Field Wiring
1. All field wiring terminates at controller board mounted in device cabinet.
7. Programming
The POD500 Ticket Dispenser is designed to provide the following programming operation:
ScanNet® Central Parking Management Program. Using this program the POD500 Ticket Dispenser can be programmed with the following commands:
1. Date / Time
2. Ticket Number.
3. Ticket Counts.
4. Initialize
You can program the following:
1. Ticket header and footer.
2. Lane Number
3. Fee Number.
4. Facility Code.
5. Ticket Size
6. Languages ( English, Spanish, Portuguese).
7. Current Date
8. Time (AM/PM, Military).
|
