Traffic & Parking Control Co., Inc. - TAPCO Parking Accessories and Facilities - PARKING CHAIN DRIVE SLIDE GATE OPERATORS - automated parking,automated parking system,automatic gate,automatic gate control,automatic gate opener,automatic gate openers,automatic gate operator,automatic gate operators,automatic gates,barrier gate,car parking system,door king gate operator,driveway gate,electric gate

TRAFFIC & PARKING CONTROL CO., Inc. 1.800.236.0112

Traffic and Parking Control Co., Inc. - Parking Division, Traffic and Control Gates, Slide and Swing Gates, Electric Gate Operators, Parking ARm Gates, Card Reader Systems

TOC

INFORMATION

CONTACT

PARKING CHAIN DRIVE SLIDE GATE OPERATORS FROM TAPCO

RESIDENTIAL LIGHT DUTY OPERATORS
Enlarge	Light Duty Models Designed to operate vehicular slide gates in residential and light-duty commercial applications only. Can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements.	Model 9050 Maximum gate length 16 feet. Maximum gate weight 300 pounds. 1/2 HP limited-duty motor. 115 VAC, 4.3 Amps. UL approved Dimensions: 12"W x 24"H x 11.5"D	Model 9070 Maximum gate length 22-feet. Maximum gate weight 500 pounds. 1/2 HP continuous-duty motor. 115 VAC, 5.4 Amps. UL approved Dimensions: 12"W x 24"H x 11.5"D

Commercial/Residential Medium Duty Operators
Enlarge	Medium Duty Models Designed to operate vehicular slide gates in residential, commercial and industrial applications. Can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements.	Model 9100 Maximum gate length 30feet. Maximum gate weight 1000 pounds. 1/2 HP continuous-duty motor. 115 VAC, 230 VAC, 460 VAC Class I, It, III and IV applications. Dimensions: 15"W x 24"H x 16.5"D	Model 9150 Maximum gate length 45-feet. Maximum gate weight 1500 pounds. 1 HP continuous-duty motor. 115 VAC, 230 VAC, 460 VAC Optional DC Convenience Open available. Dimensions: 15"W x 24"H x 16.5"D

Industrial Heavy Duty Operators

Industrial Heavy Duty Operators
Enlarge

Heavy Duty Models
Designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only, not for the general public. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. Center mounting the operator requires an optional pedestal mounting base.

Model 9200
Maximum gate length 100 feet, maximum gate weight 3000 lbs. assuming gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.
40:1 gear reduction, in continuous oil bath.

1 HP continuous-duty motor. 115, 208, 230 or 460 VAC Operator is shipped with chain brackets and 20-feet of #60 chain.
UL approved

Dimensions: 16"W x 34"H x 16"D

TRAFFIC AND PARKING CONTROL CO., INC. 800 WALL STREET ELM GROVE, WI 53122 PHONE: 262-814-7000 FAX: 262-814-7017 TOLL FREE: 1-800-236-0112 TOLL FREE FAX: 1-800-444-0331 TAPCO, Inc. Copyright © 1999-2008